Instructions for Use

Before installation, ensure that the selected surface is clean, flat, and suitable for suction mounting. Check that all product components are complete. Proper installation is essential to achieve optimal suction performance and stability. Please follow the steps below carefully.

Step 1 — Clean Surface

Thoroughly clean the installation area to remove any dust, grease, or moisture, and ensure the surface is completely dry. Any residue or dampness may affect the suction performance.

Step 2 — Prepare Product

Assemble all necessary accessories and remove the protective cover from the suction cup. Make sure the suction surface is clean and free from any debris to ensure proper contact with the installation surface.

Step 3 — Position & Force Alignment

Place the suction cup onto the desired position. During installation, align the pressure point of your palm vertically with your shoulder so that your arm forms a straight line toward the wall. This allows you to apply body weight effectively, ensuring stronger pressure and helping the suction cup fully expel internal air for better adhesion.

Step 4 — Apply Pressure

Use firm and steady force to press the suction cup tightly against the surface. Ensure full contact between the suction cup and the wall, and apply sufficient pressure to remove as much air as possible from the suction area.

Step 5 — Check Suction State

After pressing, check whether the suction cup is in a properly expanded and secured state. If the suction cup is not fully expanded or does not adhere properly, remove the product and reinstall it following the steps above.

Step 6 — Test Stability

After installation, press down on the hook to test stability. Ensure the product is firmly attached before placing any load on it.