Before installation, ensure that the selected surface is clean, flat, and suitable for adhesive mounting. Check that all product components are complete. Proper installation is essential to achieve optimal adhesive performance and stability. Please follow the steps below carefully.

Step 1 — Prepare Adhesive

Take out the adhesive strip and remove the white protective liner. Ensure the adhesive surface remains clean and free from any debris before application.

Step 2 — Attach to Base

Apply the adhesive strip directly onto the mounting base and press firmly for 10 seconds. Ensure the strip is centered and makes full contact with the base surface.

Step 3 — Clean Surface

Thoroughly clean the installation area on the wall to remove any dust, grease, or moisture. Ensure the surface is completely dry, as any residue or dampness may significantly affect the adhesive's bonding strength.

Step 4 — Position & Apply Pressure

Align the base to your desired position on the wall. Press the base firmly against the wall, applying steady force from top to bottom, and hold for 30 seconds. Repeat this pressing action 3 times to ensure a secure and durable bond.

Step 5 — Complete Installation

Once the base is securely pressed, the installation is complete. Ensure the product is firmly attached before placing any load on it.

Step 6 — Important Notice

Please note that the adhesive strip is designed for one-time use and cannot be reused. If you need to relocate the product, you will need a new adhesive strip.

Warning: This product contains small parts and presents a choking hazard. It is not suitable for children under 3 years of age. Adult supervision is required during installation and use.